The Mighty Cord RV Power Cord Adapter, # A10-3050D90VP is used to adapt your RV's 4-prong 50-amp power inlet for use with a 30-amp 3-prong extension cord/Power Pedestal. A 50-amp plug has four prongs with two of them providing 50-amps of power each. But the 30-amp RV service with 3-prongs only has one prong of power, one power wire from the 50 amp is not used.
The big difference to note between 50-Amp RV service and 30-amp RV service is that the 30-amp RV set-up provides a nominal 3,600... view full answer...
Hopkins Trailer Connector Adapter # HM47425 and Pollak Trailer Connector Adapter PK12-724 are both 7-Way round pin to 7-Way blade style adapters. Both plug into a tow vehicle that has a 7-Way round pin connector so you can tow a trailer that has a 7-Way blade style connector. They are just from different manufacturers. view full answer...
The T-One Vehicle Wiring Harness part # 118583 is a plug and play kit whereas the Curt Powered Tail Light Converter part # C59236 would require you to splice into wires on the vehicle which I do not recommend. They would function the same but installation is very different. The T-One Vehicle Wiring Harness is absolutely what I recommend you use on your 2019 Kia Sorento.
In regards to the 7-Way RV and 4-Way Flat Adapter part # ETBC7 and Adapter 4-Pole to 7-Pole and 4-Pole part # 37185,... view full answer...
The Hopkins 4-Pole to 7-Pole and 4-Pole Adapter # 37185 that you referenced accepts a vehicle's 4-pole flat trailer connector and adapts that type of connector to a 7-way RV-style blade connector socket. This socket accepts a male trailer-side 7-way plug like # H20046. The Hopkins adapter also provides a 4-pole socket, meaning that with this item installed the lights for either a 4-pole- or 7-pole-equipped trailer can be connected to the tow vehicle.
The other wire leads on the Hopkins... view full answer...
Yes you could plug the Power Grip part # CAM55025 into the part # A10-3015ARDVP so that you could plug it into both outlets that you mentioned. view full answer...
The Mighty Cord RV Power Cord Adapter # A10-3050FHVP will have the ring on the end of the 30amp male connector. This will help separate the end of the adapter from the other connector without getting your fingers near the terminals.
That is the only difference besides the color to the Mighty Cord RV Power Cord Adapter # A10-3050FBK. view full answer...
The colors on the wiring between the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P will match in terms of function. It sounds like you are wanting to use the # 3064-P to install the # RED44FR. No plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash.
Since the # RED44FR comes with a... view full answer...
There is not really a functional difference between the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera # FR87PR and the no longer available FR74FR.
The only difference is that # FR87PR will work with 2021 and up model year vehicles, while FR74FR will not. The Furrion RV Observation Camera # FR87PR replaced the older FR74FR adapter as there wasn't a need for the older one especially since it won't work with 2021 year trucks. view full answer...
Both the Hopkins # HM47365 and Pollak # PK12716 wiring adapters allow a tow vehicle with a 7-way blade-style trailer socket to connect to a trailer that is equipped with a 4-pole flat connector. Both plug in to the socket on the vehicle and provide a receptacle for a 4-pole flat trailer connector. The difference between them is that the Pollak adapter is a single piece while the Hopkins adapter uses two separate sections linked by a short length of wiring.
In some applications these flexible... view full answer...
Although the Tekonsha Plug-In Wiring Adapter # 3021-P for the 2010 - 2012 Ram looks very similar to the Tekonsha Plug-In Wiring Adapter # 3024-P for the 2015 Ram, there is a difference. Part # 3024-P includes a diode on the red wire to protect the vehicle computer on the 2015 Ram. view full answer...
The 30 amp end of Power Grip RV Power Cord Adapter # CAM55185 is not an L10-30 style. Those have a different blade configuration and are rated for 250 volts. The 30 amp end of the Power Grip cable is a standard TT 30 amp connector. view full answer...
Yes, the Tekonsha PowerTrac Electronic Brake Controller - 1 to 2 Axles - Time Delayed item # 39523 will work with your 2004 Chevy Silverado 1500. This brake controller only works with electric brakes.
Since your Chevy has the factory tow package you will want to grab the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM item # 3015-P. This is a plug-in adapter that allows you to connect a Tekonsha brake controller to your Chevy truck without cutting or splicing wires.... view full answer...
The only difference between the Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End # 54006-057 and the 7-Way Molded Trailer End with 6' Cable - HD Blue Insulated # 54006-009 is the color coding of the wire inside. The functions of the wires are the exact same so you wouldn't need to use an adapter to go from one style to the other. It would be just a matter of matching the wires by function if needed and not by color.
I've attached the photos of each color... view full answer...
There are some differences between the Hollywood Racks Sport Rider SE # HLY84FR and the Hollywood Racks RV Rider # HLY64FR. First off, the RV rider is constructed to be compatible with cars, trucks, vans, SUVs, fifth-wheel trailers, motorhomes, and flat-towed vehicles. The Sport Rider SE, on the other hand, is only rated for cars, trucks, vans, SUVs, and motorhomes. This does not affect you since you have a motorhome, but it is worth considering if you plan on using the racks on other vehicles.... view full answer...
The difference between the Camco RV Power Defender 30 amp, part # CAM55312 and the Camco RV Power Defender 50 amp, part # CAM55313 is the amperage that they work on.
The 50 amp variant is built for higher power drawing RVs, while the 30 amp is designed for lower power RV's. You'll want to match your particular plugs and required amperage to your RV when choosing which product to buy. view full answer...
You are correct that Swagman Platform-Style 2 Bike Rack # S64663 does include both an RV-rated 2-bike rack as well as a bumper-mount RV hitch receiver that installs on a continuously welded 4- to 4-1/2-inch tall steel RV bumper. Part # S64025 is just the RV hitch itself.
Swagman XTC-2 2-Bike Platform Rack # S64670 does fit both 1-1/4-inch and 2-inch hitches however this rack is NOT rated for use on the back of a trailer.
Swagman offers their Dispatch 2 Bike Platform Rack # S44FR that... view full answer...
Both adapter PK12-724 and # HM47425 plug into a 7-Way with round pins and provide a 7-Way blade style connector. They are made by different manufacturers but accomplish the same task.
Pollak adapter PK12-724 has a 1 year warranty whereas Hopkins adapter # HM47425 has a 90 day warranty. view full answer...
The Mighty Cord Replacement RV Power Inlet - Black # A10-50INBKVP and the RV Power Inlet - White # A10-50INVP referenced in your question are indeed the exact same product except for their color. These male twist-lock plugs will both accept a 50-amp female twist-lock plug and feature a threaded ring that creates a weatherproof connection. They both measure 3-3/4 inches long and 3-5/8 inches wide. As you mentioned, your only choice between the two models will simply be your color preference.
I... view full answer...
The Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector # HM48470 is a combination 7-, 5- and 4-way trailer socket for a tow vehicle that connects to the vehicle through screw-down wire terminals on its rear. With this item in place you can connect trailers with either 4-pole or 5-pole flat connectors or a 7-way blade style.
Hopkins Endurance Multi-Tow Trailer Connector Adapter # HM47570 serves a similar purpose but its connections are different. This part connects to the... view full answer...
The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP94720 for Lippert 1621, 1621HD, and 0719 pin boxes will not increase your turning clearances by itself beyond the Andersen Ultimate hitch you have. The distance from the center of the hitch ball coupler to the center of the first row of bolt holes is 17-3/4 inches. The biggest benefit is the air ride suspension along with one less moving part.
The only way to increase this is to use an offset hitch ball like the... view full answer...
Go To Results